Skip to content
ARMAG
Carbine

B&T APC308

Brügger & ThometContemporary

Also known as APC308

Muzzle energy

How Muzzle energy is calculated

E = ½ · m · v²

Inputs

  • m9.525 g147.0 grverifiedsourcePublished as 147 gr; 1 gr = 0.06479891 g exactly.
  • v853 m/s2,799 fpsverifiedMeasured with a 558.8 mm barrel, not this arm's 330 mm. Velocity outside the sourced range is not projected.

1 of 2 inputs link to their source.

3,465 J2,556 ft·lbf
Muzzle velocity

How Muzzle velocity is calculated

nearest sourced barrel length, no extrapolation

Inputs

  • v at 558.8 mm853 m/s2,799 fpsverifiedsourceBallistics table of the cited article.

Assumptions

  • This figure belongs to a 558.8 mm barrel. It is shown because it is the closest measurement that exists, not because it applies here.

1 of 1 inputs link to their source.

853 m/s2,799 fps
Loaded mass

How Loaded mass is calculated

m_loaded = m_empty + m_magazine + n · m_cartridge

Not calculated: m_magazine has no sourced figure yet. Nothing is substituted for a missing input.

Assumptions

  • One magazine, filled to the stated capacity. Spare magazines, optics, slings and lights are the owner’s, not the arm’s.

2 of 4 inputs link to their source.

not recordednot recorded
Free recoil

How Free recoil is calculated

E_recoil = ½ · m_firearm · v_recoil²

Inputs

  • m_firearm4 kg8.818 lbverifiedsourceFrom the specification table of B&T's APC308 datasheet (2020/04), APC308 column. Given as "weight empty ... with magazine".
  • v_recoil2.031 m/s6.664 fpsestimated

Assumptions

  • Propellant gas momentum is excluded: ARMAG does not record charge weights. This is therefore a lower bound on the real free recoil, consistent between entries but smaller than a figure that includes the gas term.
  • Free recoil: the arm is unrestrained. Stock design, muzzle devices, stance and shooter mass are not modelled, because none of them is a property of the arm.

1 of 2 inputs link to their source.

8.252 J6.086 ft·lbfestimated
Capacity

How Capacity is calculated

as published for the primary chambering

Inputs

  • capacity25verifiedsourceMagpul SR25/M110/AR10-pattern magazines in 10, 20 and 25 rounds; 25 is the largest.

1 of 1 inputs link to their source.

25

Derived figures

Computed from the sourced values above. Open ƒ on any figure for the formula, its inputs, and the assumptions it makes.

Momentum

How Momentum is calculated

p = m · v

Inputs

  • m9.525 g147.0 grverifiedsourcePublished as 147 gr; 1 gr = 0.06479891 g exactly.
  • v853 m/s2,799 fpsverifiedMeasured with a 558.8 mm barrel, not this arm's 330 mm. Velocity outside the sourced range is not projected.

1 of 2 inputs link to their source.

8.125 kg·m/s
Sectional density

How Sectional density is calculated

SD = mass(gr) / (7000 · diameter(in)²)

Inputs

  • mass9.525 g147.0 grverifiedsourcePublished as 147 gr; 1 gr = 0.06479891 g exactly.
  • diameter7.85 mm0.3091 inestimatedsourceNo free dimensional standard publishes the NATO round under that name. Borrowed from the C.I.P. datasheet for the commercial .308 Winchester (G1), which shares the chamber; the two are not interchangeable at the pressure limit.

Assumptions

  • Reported in the conventional lb/in² so it is directly comparable with published figures.

2 of 2 inputs link to their source.

0.2199 lb/in²estimated
Power factor

How Power factor is calculated

PF = mass(gr) · velocity(fps) / 1000

Inputs

  • mass9.525 g147.0 grverifiedsourcePublished as 147 gr; 1 gr = 0.06479891 g exactly.
  • velocity853 m/s2,799 fpsverifiedMeasured with a 558.8 mm barrel, not this arm's 330 mm. Velocity outside the sourced range is not projected.

Assumptions

  • A competition classification defined by the IPSC and USPSA rulebooks, stated in their units. It describes a scoring category, not an effect.

1 of 2 inputs link to their source.

411.4 gr·fps/1000
Magazine dump

How Magazine dump is calculated

t = (n − 1) / (rpm / 60)

Not calculated: rpm has no sourced figure yet. Nothing is substituted for a missing input.

Assumptions

  • Cyclic rate held for the whole magazine, no stoppages, trigger held down. A theoretical figure for comparing mechanisms, not a measured one.

1 of 2 inputs link to their source.

not recordednot recorded
Sight error at 1 mm

How Sight error at 1 mm is calculated

θ = atan(misalignment / sight radius)

Not calculated: sight radius has no sourced figure yet. Nothing is substituted for a missing input.

Assumptions

  • Shows what a stated aiming error costs. The misalignment is the reader’s figure; the site does not claim how well anyone aims.

No input on this calculation carries a clickable source yet.

not recordednot recorded

Variants

APC308 DMR

The longer-barrelled designated-marksman version.

Mass, empty
4.6 kg10.14 lbsource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 - DMR column. With magazine.

Length
1,026 mm40.39 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 - DMR column. Stock open.

Length, folded
813 mm32.01 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 - DMR column. Stock closed.

Barrel length
480 mm18.90 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 - DMR column.

VariantYearsChanges
APC308 DMR—Mass, empty, Length, Length, folded, Barrel length

Specifications

Every row here is generated from the schema, so a figure recorded on this entry cannot be missing from the table, and the same rows, read the same way, are what the comparison shows.

Identity
Fire modes
  • Semi-automatic
Operating system
Gas, short-stroke piston
Designed in
Switzerland
Produced in
Introduced
2016
Production
not recorded
Dimensions and mass
Mass, empty
4 kg8.818 lbsource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column. Given as "weight empty ... with magazine".

Magazine, empty
not recorded
Length
875 mm34.45 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column. Stock open.

Length, folded
663 mm26.10 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column. Stock closed.

Width
101 mm3.976 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column. Stock closed; 69 mm with the stock open.

Height
199 mm7.835 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column.

Barrel length
330 mm12.99 insource

From the specification table of B&T's APC308 datasheet (2020/04), APC308 column.

Sights and rifling
Sight radius
not recorded
Sight height over bore
not recorded
Rifling twist
304.8 mm12.00 insource

One turn in 12 inches, right hand, as stated on the datasheet.

Twist direction
not recorded
Grooves
not recorded
Sight graduation
not recorded
Operation
Cyclic rate
not recorded
Trigger pull
not recorded
Effective range
not recorded
Units produced
not recorded
Launch price
not recorded

Chamberings

Scale

A to-scale outline against family siblings. The dimensions are sourced; the shape is a representative outline for the type, and says so.

  • B&T APC308875 mm34.45 in

Representative outline: the dimensions are sourced, the shape is not. Overall length, and barrel length where recorded, are drawn from this entry's own figures; the profile is a generic one for the firearm type and says nothing about this arm's actual contours.

Compare this against any other entry →

Detail

The APC308 is the 7.62×51mm NATO member of B&T’s Advanced Police Carbine family, previewed in October 2016 for release early the following year. B&T presented it as the model that completed the family, giving a full-power rifle the same ergonomics and controls as the pistol-calibre APC9 and the 5.56mm APC556, and like the APC556 it is gas-operated, with a short-stroke piston, rather than blowback.

The maker’s datasheet lists it as semi-automatic only, in two versions: a carbine with a 330 mm barrel and a designated-marksman version with a 480 mm barrel, both cold-hammer-forged in Germany with a one-in-twelve-inch twist chosen to suit a wide range of bullet weights. The upper receiver is machined from solid alloy with its top and bottom rails cut into it rather than bolted on, the gas block has a setting for use with a suppressor, and the rifle feeds from SR-25-pattern magazines. Its folding stock folds to the right and the rifle can be fired with it closed.

Every figure on this page comes from B&T’s own datasheet, read through a permanent archived copy. Its mass figures are stated with a magazine fitted. The datasheet gives no muzzle velocity, and no photograph of this model with a free licence could be found.

References

This entry's own bibliography. Every citation key on this page resolves into this list.

  1. Brügger & Thomet APC · Wikipedia · 1373702344 · read 2026-09-24 · CC BY-SA 4.0
  2. APC308 7.62 x 51 mm (.308 Win) (datasheet 2020/04) · B&T AG · read 2026-09-24
  3. PREVIEW: The New B&T APC308 · The Firearm Blog · read 2026-09-24

Last verified 2026-09-24 · review status: draft